Home > Parts & Accessories > Replacement and Optional Items > Classic Edge
Sort By:
Page of 2
Foam Bumper Pad, Door Switch - Classic Edge, Forge Sight Gauge Components, Sight Gauge Tube Wingnut, Classic Edge
Wingnut, Classic Edge
Our price: $1.99
Foam with adhesive, 3/8 thick x 3/4 wide. When ordering specify the length in feet. Replacement sight gauge tube only (Per Foot, 9/16" OD x 3/8" ID). Classic Edge 350, 550 & 750 models use 6" length. E-Classic 1450, 3200 & 3250 models use 6" length. E-Classic 1400, 2300 & 2400 models use 7" length. Forge 1500 & 3500 models use 9" length. Classic 4030, 5036, 6048 & 7260 models use 9" length. Pallet Burner models use 14" length. Components replace original components. Replacement wingnut for Reaction Chamber door on Classic Edge and E-Classic models.
Pump Panel Latch, Classic Edge Models Thermocouple Insulation Kit Primary Intake Spring
Primary Intake Spring
Our price: $4.15
Replacement Pump Panel Latch for Classic Edge models.
Kit for insulating the Reaction Chamber thermocouple on Classic Edge Titanium HD models. Includes insulating sleeve and O-ring.
Replacement spring on these furnace models using solenoids on the primary air intake assemblies. - Classic Edge 350, 550 models with steel elbows.
Primary Intake Spring Bypass Alarm Switch, E-Classic Ignition Ready, Classic Edge 550 and 750 Snap Disc, 180°-205°F (High Limit Water Jacket)
Primary Intake Spring
Our price: $4.15
Replacement spring on these furnace models using solenoids on the primary air intake assemblies. - Classic Edge 350, 550 & 750 models with molded elbows. - Classic Edge 750 models with steel elbows. - E-Classic 3250 models with molded elbow. - E-Classic 1400, 1450, 2300, 2400 & 3200 models with steel elbows.

Replacement Bypass Alarm Switch for E-Classic Ignition Ready furnaces and Classic Edge 550 and 750 furnaces.

Replacement snap disc for Classic Edge and Maxim models.  Snap Disc, 180-205F (High Limit Water Jacket)
Door Switch, E-Classic, Classic Edge, Forge Door Latch Bushing/Collar Kit, Classic Edge Close-off Plate Assembly
Close-off Plate Assembly
Our price: $18.14
Replacement snap action door switch for E-Classic Ignition Ready/Dual Fuel models, Classic Edge 350/550/750 models and Forge 1500/3500 models. Replacement bushing and spacer for Classic Edge door latch. Replacement closeoff plate asm for primary intake on all E-Classic and Classic Edge models with steel elbows. Replacement closeoff plate asm for high secondary intake on all E-Classic models except the 1450.
Solenoid, 1-3/8" center-to-center bracket hole Refractory - Rear Lower Clean Out Door, E-Classic 1450, RC Door, Classic Edge 350/550 Door Seal Only - Classic Edge 35
For models after June 2000 including all E-Classic models.  (For pre-June 2000 Classic models, use Solenoid p/n 167.)  Solenoid, 1-3/8" center-to-center bracket hole Replacement refractory for rear lower clean out door on E-Classic 1450 models and reaction chamber door on Classic Edge 350 & 550 models. Replacement rope (part number 7674) required: 5 ft. Pre-formed (3/4"X3/4"Sq) door seal only for Classic Edge 350 model doors. (silicone adhesive not included).
Bypass Alarm, E-Classic, Classic Edge Door Seal Only - Classic Edge 750 Door Seal Kit, Silicone, for Classic Edge 350
Replacement bypass alarm for E-Classic 1400, 1450, 2400, 3200 & 3250 Ignition Ready models and for Classic Edge 550 & 750 models. Pre-formed (3/4"X3/4"Sq) door seal only for Classic Edge 750 model doors. (silicone adhesive not included). Kit includes Door Seal and Bronze Silicone Adhesive for Classic Edge 350 model doors.  Door seals are pre-formed to fit properly.
Front Air Channel Kit, Classic Edge 350 Refractory - Reaction Chamber Door, Classic Edge 750 Water Level Float Switch
Water Level Float Switch
Our price: $34.78
Use for Classic Edge 350 models with serial # G300479 and Up. Also for affected serial numbers listed in instruction part number 9000441. Replacement refractory for reaction chamber door on Classic Edge 750 models. Replacement rope (part number 7674) required: 6 ft. Replacement water level float switch kit for E-Classic, Maxim, Classic Edge and Forge models.
Front Air Channel Kit, Classic Edge 550 Side Air Channel Kit, Classic Edge 350 Front Air Channel Kit, Classic Edge 750
Use for Classic Edge 550 models with serial # G501253 and Up. Also for affected serial numbers listed in instruction part number 9000441. Replacement Side Air Channels for Classic Edge 350 models. Each kit contains the necessary nuts, bolts, washers and instructions. Nuts, bolts and washers can also be purchased separately. Use for Classic Edge 750 models with serial # G700958 and Up. Also for affected serial numbers listed in instruction part number 9000441.
Door Seal Kit, Silicone, for Classic Edge 750 Side Air Channel Kit, Classic Edge 550 Secondary LED Light Kit, Classic Edge Models
Kit includes Door Seal and Bronze Silicone Adhesive for Classic Edge 750 model doors.  Door seals are pre-formed to fit properly. Replacement Side Air Channels for Classic Edge 550 models. Each kit contains the necessary nuts, bolts, washers and instructions. Nuts, bolts and washers can also be purchased separately. Secondary LED light is installed under the eave on the side of the furnace opposite the controller.

NOTE: Requires LED Light Kit (p/n 2500144).
Power Supply, Stepper Motor Refractory - Upper, Classic Edge 350 Stepper Motor Assembly
Stepper Motor Assembly
Our price: $45.30
Replacement power supply for FireStar combustion controller on Classic Edge 350, 550 & 750 models with stepper motors and on Forge 1500 & 3500 models. Replacement firebox refractory for Classic Edge 350 models. Two (2) required per furnace. Replacement rope (part number 809) required: 4 ft. Replacement stepper motor for Classic Edge 350, 550, 750 models and Forge 1500, 3500 models. Includes stainless steel chain and wiring harness.