Home > Parts & Accessories > Valves
Sort By:
Page of 2
Washer, 3/4" Cap, Brass, 3/4" Ball Valve, 1/2” PEX, Full Port
Washer, 3/4"
Our price: $0.40
Cap, Brass, 3/4"
Our price: $1.50
Washer, 3/4".  Can be used to with part 5348 (Cap, Brass 3/4") to cover end of brass hose bib (p/n 199). Cap, Brass, 3/4".  Can be used to with part 5349 (Washer, 3/4") to cover end of brass hose bib (p/n 199). Full port ball valve 1/2 for Central PEX.
Straight Hose Bib, 3/4" MPT Vent Elbow, Copper, 3/4" x 3/4" sweat fittings Mounting Bracket for 3/4" NPT Thermostatic Valve
Brass straight hose bib, 3/4" MPT.  Use brass cap (part number 5348) with washer (part number 5349) to cover the end. Vent Elbow, Copper, 3/4" x 3/4" sweat fittings Mounting Bracket for 3/4" Thermostatic Valve.
Mounting Bracket for 1-1/4" NPT Thermostatic Valve Ball Valve, 1/2" Brass Hose Bib, 3/4" MPT
Ball Valve, 1/2"
Our price: $8.43
Mounting Bracket for 1-1/4" NPT Thermostatic Valve Brass FIP Ball Valve, 1/2". Brass hose bib, 3/4" MPT.  Use brass cap (p/n 5348) with washer (p/n 5349) to cover the end. Brass Hose Bib, 3/4" MPT
Ball Valve, 3/4" Full Port Sweat Ball Valve, 3/4" x 3/4", sweat fittings Ball Valve, 1” PEX, Full Port
Brass FIP Ball Valve.  3/4" Full Port Ball Valve is used on both sides of the pump and on the furnace for each water line.  Ball Valve, 3/4" Full Port Sweat Ball Valve, 3/4" x 3/4", sweat fittings - Lead Free Full port ball valve 1 for Central PEX.
Thermostat Kit, 150°F Vent Elbow, Copper, 1" x 1" sweat fittings Swing Check Valve, Brass, 3/4"
Thermostat Kit, 150F
Our price: $11.50
Replacement thermostat for thermostatic valve kits.  Includes gasket and instructions.  Note that for the 1-1/4" thermostatic valve, two thermostats are required.  Thermostat Kit, 150F Vent Elbow, Copper, 1" x 1" sweat fittings Brass Swing Check Valve with FIP fittings prevents reverse circulation.  Swing Check Valve, Brass, 3/4"
Automatic Vent Valve 3-Way Valve, Brass, 3/4" FIP Purge Tee, Drain, Brass, 3/4" female
Automatic Vent Valve
Our price: $13.45
Automatic Vent Valve, vents air automatically.  For use in pressurized systems only.  Fitting is 1/8" NPT. Manually operated, FIP, brass 3-Way Valve. Purging and Filling Tee used to fill system and purge system of air.  Purge Tee, Drain, Brass, 3/4" female
Ball Valve, 1-1/4" Swing Check Valve, Brass, 1-1/4" Manifold w/o Valve, 2-Loop
Ball Valve, 1-1/4"
Our price: $23.33
Brass FIP Ball Valve, 1-1/4". Brass Swing Check Valve with FIP fittings prevents reverse circulation.  Swing Check Valve, Brass, 1-1/4" For use with 1/2" PEX pipe in radiant floor installations.  Manifold fittings are 1" copper sweat; valve fittings are 1/2" barbed.  Does not include valves or caps.
Valve Head, 1/2” Vertical, TRV II Manifold w/o Valve, 3-Loop Manifold with Valve, 2-Loop
Thermostatic radiator valve replacement head only For use with 1/2" PEX pipe in radiant floor installations.  Manifold fittings are 1" copper sweat; valve fittings are 1/2" barbed.  Does not include valves or caps. For use with 1/2" PEX pipe in radiant floor installations.  Manifold fittings are 1" copper sweat; valve fittings are 1/2" barbed.
3/4" NPT Thermostatic Valve Flow Check Valve, 1" threaded Repair Kit, 2-Way Zone Valve, 3/4" and 1"
The Thermostatic Valve is the first item plumbed inside the building (unless the furnace circulation pump is mounted indoors) and helps to prevent the water temperature from dropping below the optimal operating temperature.  Protects against corrosion and freezing by reducing the heat load on the outdoor furnace when the fuel runs out.  One is required for each set of supply and return lines connected to the furnace.  A single 3/4" Thermostatic Valve comes with each furnace. A separate fittings kit (p/n 1548) is available for easy installation.  For 1-1/4" supply and return lines, Thermostatic Valve (p/n 2500025) and fittings kit (p/n 1624) should be used. Used in hydronic floor heating to prevent ghost flow when the components are above the manifold.  Can be installed horizontally or vertically.  Flow Check Valve, 1" threaded 2-Way Zone Valve Repair Kit includes valve body, spring, plate and screws
Manifold with Valve, 3-Loop Repair Kit, 3-Way Zone Valve, 3/4" and 1" Replacement Acutator Head
Replacement Acutator Head
Our price: $76.17
For use with 1/2" PEX pipe in radiant floor installations.  Manifold fittings are 1" copper sweat; valve fittings are 1/2" barbed. 3-Way Zone Valve Repair Kit includes valve body, spring, plate and screws Replacement acutator head for 5800020 and 5800021 Zone Sentry zone valves.